Jaguar XJ (X350). Manual — part 324

Engine Front Cover (12.65.01)

Special Service Tools

Wrench strap-universal

303-D055

Crankshaft Pulley Remover

303-D121

Crankshaft Pulley Installer

303-102

Thrust Pad

303-D121-01

Crankshaft pulley installer

303-335/2

Removal

1 . Remove the left-hand valve cover.

For additional information, refer to

2 . Remove the right-hand valve cover.

For additional information, refer to Valve Cover RH (12.29.44)

3 . Remove the oil pan.

For additional information, refer to

4 . Carry out the cooling system draining procedure. <<303-03A>>

5 . Remove the accessory drivebelt.

1) Rotate the belt tensioner counter-clockwise.

Use a 3/8 inch square drive bar to rotate the belt tensioner.

2) Remove the accessory drivebelt.

6 . Lower the vehicle.

7 . Disconnect the radiator top coolant hose.

www.

8 . Disconnect the coolant hose from the top coolant hose assembly.

9 . Disconnect the hose assembly from the water pump and lower hose.

10 . Remove the hose assembly.

11 . Install the special tool.

12 . Remove the crankshaft pulley retaining bolt.

13 . Install the special tool.

14 . Using the special tools, remove the crankshaft pulley.

www.