Jaguar XJ (X350). Manual — part 896
P0103
Mass air flow (MAF)
sensor sensing circuit high
voltage
MAF sensor to ECM sensing
circuit; short circuit to
B+ voltage
MAF sensor to ECM ground
circuit; open circuit
MAF sensor failure
For MAF sensor tests, GO to
Pinpoint Test G258127p1.
P0105
Manifold absolute
pressure (MAP) sensor
range/performance
Intake manifold air leak
(loose or missing
component)
MAP sensor to ECM
circuit(s) fault
MAP sensor failure
Throttle adaptation fault
(check throttle position
voltage at ignition ON)
Check air intake system. For
further information,
Intake Air Distribution and
Filtering - VIN Range: G00442-
>G45703 For MAP sensor circuit
tests, GO to Pinpoint Test
G258127p33.
Throttle adaptation is automatic
at key on.
P0106
BARO sensor circuit
range/performance
BARO failure (internal ECM
fault)
Contact dealer technical support
for advice on possible ECM
failure.
P0107
BARO sensor circuit, low
voltage
BARO failure (internal ECM
fault)
Contact dealer technical support
for advice on possible ECM
failure.
P0108 BARO circuit, high voltage
BARO failure (internal ECM
fault)
Contact dealer technical support
for advice on possible ECM
failure.
P0111
Intake air temperature
(IAT) sensor
range/performance
Blocked air filter
Air intake leak
Engine breather leak
IAT sensor to ECM wiring;
open circuit or high
resistance
IAT sensor to ECM sensing
circuit; short circuit to
high voltage
IAT sensor failure
Check air filter element, air
intake system for leaks. For
further information,
Intake Air Distribution and
Filtering - VIN Range: G00442-
>G45703 Check engine breather
system. For further information,
Engine Emission Control - VIN
Range: G00442->G45703 For
IAT sensor tests, GO to Pinpoint
Test G258127p2.
P0112
Intake air temperature
(IAT) sensor circuit high
voltage (low air
temperature)
IAT sensor disconnected
IAT sensor to ECM wiring;
open circuit or high
resistance
IAT sensor to ECM sensing
circuit short circuit to B+
voltage
IAT sensor failure
For IAT sensor tests, GO to
Pinpoint Test G258127p2.
P0113
Intake air temperature
(IAT) sensor circuit low
voltage (high air
temperature)
IAT sensor to ECM wiring
short circuit to ground
IAT sensor failure
For IAT sensor tests, GO to
Pinpoint Test G258127p2.
P0116
Engine coolant
temperature (ECT) sensor
circuit range/performance
ECT sensor disconnected
Low coolant level
Contaminated coolant
Thermostat failure
ECT sensor to ECM sensing
circuit; open circuit,
high resistance when
hot, intermittent high
resistance
ECT sensor failure
Engine cooling fan stuck on
high speed
Above normal air flow
through engine
compartment, due to
accident damage and/or
missing panels
Refer to visual inspection table
in this section, check sensor
connections, coolant level and
condition, thermostat operation.
For ECT sensor tests, GO to
Pinpoint Test G258127p3.
P0117
Engine coolant
temperature (ECT) sensor
sensing circuit high
voltage (low coolant
temperature)
ECT sensor disconnected
ECT sensor to ECM sensing
circuit; high resistance,
open circuit, short
circuit to B+ voltage
ECT sensor failure
For ECT sensor tests, GO to
Pinpoint Test G258127p3.
www.
P0118
Engine coolant
temperature (ECT) sensor
sensing circuit low voltage
(high coolant
temperature)
Engine overheat condition
ECT sensor to ECM wiring
short circuit to ground
ECT sensor failure
Check for overheating, for
further information,
Engine Cooling For ECT sensor
tests, GO to Pinpoint Test
G258127p3.
P0121
Throttle position (TP)
sensor circuit
range/performance (TP1
compared to TP2)
TP sensor to ECM wiring;
open circuit, high
resistance
TP sensor to ECM sensing
circuits; (TP 1 or TP 2)
short circuit to B+
voltage
TP sensor failure
For TP sensor tests, GO to
Pinpoint Test G258127p4.
P0122
Throttle position (TP)
sensor circuit 1 low
voltage
TP sensor to ECM sensing
circuit (TP1); open
circuit, short circuit to
ground, high resistance
TP sensor failure
For TP sensor tests, GO to
Pinpoint Test G258127p4.
P0123
Throttle position (TP)
sensor circuit 1 high
voltage
TP sensor to ECM sensing
circuit (TP1); short
circuit to high voltage
TP sensor failure
For TP sensor tests, GO to
Pinpoint Test G258127p4.
P0125
Engine coolant
temperature (ECT) sensor
response (for closed loop
fuel control) (coolant
thermostat monitor)
ECT sensor disconnected
Low coolant level
Contaminated coolant
Thermostat failure
ECT sensor to ECM sensing
circuit; high resistance,
open circuit or short
circuit to high voltage
Engine cooling fan stuck on
high speed
Above normal air flow
through engine
compartment, due to
accident damage and/or
missing panels
Refer to visual inspection table
in this section, check sensor
connections, coolant level and
condition, thermostat operation.
For ECT sensor tests, GO to
Pinpoint Test G258127p3.
Check for associated codes
related to cooling fan. Check the
vehicle for panel damage.
P0128
Coolant thermostat
range/performance
Contaminated coolant
Engine coolant thermostat
failure
ECT sensor failure
ECT sensor DTC may also be
flagged
Check coolant level and
condition, check thermostat
operation,
Engine Cooling Check for
associated codes related to ECT
sensor.
P0131
Right-hand H02S sensing
circuit low current
(universal oxygen sensor;
lean condition at ECM -
high current at sensor)
H02S disconnected
H02S to ECM variable
current circuit fault
(HO2S pin 3)
ECM to HO2S constant
current circuit fault
(HO2S pin 4)
H02S failure
For HO2S tests, GO to Pinpoint
Test G258127p6.
P0132
Right-hand H02S sensing
circuit high current
(universal oxygen sensor;
rich condition at ECM -
low current at sensor)
H02S disconnected
H02S to ECM variable
current circuit fault
(HO2S pin 3)
ECM to HO2S constant
current circuit fault
(HO2S pin 4)
H02S failure
For HO2S tests, GO to Pinpoint
Test G258127p6.
P0133
Right-hand H02S sensing
circuit slow response
Engine misfire
H02S disconnected
H02S mechanical damage
H02S to ECM wiring fault
H02S short circuit to ground
H02S to ECM wiring shield
open circuit
HO2S heater circuit fault
H02S failure
Check for associated codes
related to misfire, (P0300 to
P0308) inspect the HO2S for
connection/damage. For HO2S
diagnosis, GO to Pinpoint Test
G258127p6.
For HO2S heater diagnosis, GO
to Pinpoint Test G258127p9.
Check for exhaust leak, for
further information,
Exhaust temperature will be low
if misfire/poor fuel supply
condition exists. Catalytic
converter efficiency will be poor
until it reaches "light-off".
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст