Jaguar XJ (X350). Manual — part 289

Removal and installation

Ignition Switch Lock Cylinder (57.40.29)

Removal

Vehicles with ignition switch lock cylinder interlock cable

1

.

CAUTION: When disconnecting the 'J' gate make sure that no damage occures to

the interlock cable.

Remove the transmission selector lever.

<<307-05>>

All vehicles

2 . Remove the instrument panel lower trim.

3 . Remove the steering column lower shroud.

4

.

CAUTION: If excessive force is used to remove the ignition switch lock cylinder

shroud damage may occur to the instrument panel.

Remove the ignition switch lock cylinder shroud.

5

.

CAUTION: If excessive force is used to remove the ignition switch lock cylinder

housing damage may occur to the instrument panel.

Using a suitable tool, detach the ignition switch lock cylinder housing.

6 . Disconnect the electrical connector.

www.

Vehicles with ignition switch lock cylinder interlock cable

7 .

CAUTION: Make sure the ignition switch lock cylinder interlock cable is not

crimped.

Remove the ignition switch lock cylinder housing.

Disconnect the electrical connector.

All vehicles

8 . Remove the ignition switch lock cylinder housing.

Disconnect the electrical connector.

9 . Remove the ignition switch lock cylinder.

1) Turn ignition key to position one.

2) Release the retaining plunger.

3) Remove the ignition switch lock cylinder.

Installation

1 . To install, reverse the removal procedure.

Tighten to 3 Nm.

www.