Jaguar XJ (X350). Manual — part 290

Steering Column (57.40.01)

Removal

1 . If possible make sure that the steering column is fully lowered and fully extended.

2 . Remove the clockspring.

For additional information, refer to

Clockspring (86.65.92)

3 . Disconnect the steering wheel rotation sensor electrical connector.

4 . Remove the steering wheel rotation sensor.

5 . Detach the left-hand multifunction switch wiring harness.

6 . Detach the left-hand multifunction switch wiring harness.

7 . Detach the right-hand multifunction switch wiring harness.

8 . Detach the right-hand multifunction switch wiring harness.

9 . Disconnect the steering column electrical connector.

www.

10 . Remove the steering column pinch bolt.

11 . Detach the steering column.

Support the weight of the steering column.

12 . Remove the steering column.

Disconnect the steering column lock actuator electrical connector.

Installation

1 . Install the steering column.

Connect the steering column lock actuator electrical connector.

2 . NOTE:

Tighten the retaining nuts in the sequence shown.

Attach the steering column.

Tighten to 30 Nm.

www.