Jaguar XJ (X350). Manual — part 1332
Installation
1 . To install, reverse the removal procedure.
Make sure the internal pivot is located in the slide.
2 . Check the headlamp adjustment.
For additional information, refer to
Headlamp Leveling Sensor (86.42.15)
Removal
1 . Remove the wheel and tire assembly. <<204-04>>
2 . Disconnect the headlamp leveling sensor electrical connector.
3 . Detach the wheel speed sensor harness.
4 . Detach the headlamp leveling sensor link rod.
5 . Remove the headlamp leveling sensor.
www.
Remove the headlamp leveling sensor retaining bolts.
Installation
1 . To install, reverse the removal procedure.
2 . Tighten to 20 Nm.
High Mounted Stoplamp (86.41.01)
Removal
1 . Detach the high mounted stoplamp from the header panel.
2 . Remove the high mounted stoplamp.
Disconnect the high mounted stoplamp electrical connector.
Installation
1 . To install, reverse the removal procedure.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст