Jaguar XJ (X350). Manual — part 601

11 . Release the cooling system pressure.

Remove the coolant expansion tank pressure cap.

12

.

Top up the cooling system.

Fill the cooling system up to the MAX mark on the coolant expansion tank

using a fifty percent mixture of Jaguar Premium Cooling System Fluid or

equivalent, meeting Jaguar specification WSS M97B44-D and fifty percent

water.

13 . Install the coolant expansion tank pressure cap.

Water Pump - 3.0L, VIN Range: G00442-
>G45703 (26.50.01)

Removal

1

.

Remove fuse 14 from the engine compartment fuse box prior to performing any under hood

service in the area of the cooling fan.

2 . Drain the cooling system.

For additional information, refer to

3 . Lower the vehicle.

4 . Remove the air cleaner outlet pipe. <<303-12A>>

5

.

Remove the accessory drive belt.

1) Rotate the accessory drive belt tensioner counter-clockwise.

Use a 3/8 inch square drive bar to rotate the accessory drive belt

tensioner.

2) Remove the accessory drive belt.

6 . Remove the intake manifold support bracket.

www.

7 . Disconnect the radiator top coolant hose.

8 . Detach the coolant hose from the housing assembly.

9 . Disconnect the coolant hoses.

10 . Remove the hoses and thermostat housing assembly.

11 . Remove the coolant hose.

12 . Remove the coolant hose from the water pump to lower housing.

13 . Remove the water pump.

www.