Jaguar XJ (X350). Manual — part 602

Installation

1 . To install, reverse the removal procedure.

Tighten to 25 Nm.

2 . Fill the cooling system.

For additional information, refer to

Water Pump - 3.0L, VIN Range: G45704-
>G99999 (26.50.01)

Removal

1

.

Remove the accessory drive belt.

For additional information, refer to Accessory Drive Belt - 3.0L, VIN Range: G45704->G99999

(12.10.40)

2 . Drain the cooling system.

For additional information, refer to Cooling System Draining, Filling and Bleeding

3 . Remove the secondary air injection (AIR) control valve.

For additional information, refer to Secondary Air Injection (AIR) Control Valve - 3.0L

4 . Lower the vehicle.

5 . NOTE:

This bracket retains the evaporative emission cannister purge valve.

Remove the intake manifold support bracket.

6 . Disconnect the radiator top coolant hose.

www.

7 . Disconnect the coolant hose from the housing assembly.

8 . Disconnect the coolant hoses.

9 . Remove the coolant hoses and thermostat housing assembly.

10 . Remove the coolant hose.

11 . Remove the coolant hose from the water pump to lower housing.

12 . Remove the water pump.

Installation

1 . To install, reverse the removal procedure.

Tighten to 25 Nm.

www.

Была ли эта страница вам полезна?
Да!Нет
3 посетителя считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности