Jaguar XJ (X350). Manual — part 1088

Installation

1 . NOTE:

Right-hand shown, left-hand similar.

To install, reverse the removal procedure.

Tighten to 40 Nm.

Exhaust System - 2.7L V6 - TdV6

Removal

1 . Remove both muffler and tailpipes.

For additional information, refer to Muffler and Tailpipe (30.10.52)

2 . NOTE:

Right-hand shown, left-hand similar.

Loosen the catalytic converter to particulate filter retaining clamp.

3 . NOTE:

Discard the diesel particulate filter mount bracket retaining nuts.

Remove the diesel particulate filter mount bracket.

4 . Disconnect the diesel particulate filter temperature sensor electrical connector.

www.

5

.

NOTE:

Note the orientation of the diesel particulate filter high-pressure and low-pressure hoses

and make sure they are installed in the same position. There is a paint mark to identify

the high-pressure hose.

Detach the diesel particulate filter high-pressure and low-pressure hoses.

6 . NOTE:

Left-hand shown, right-hand similar.

Detach the under body tray.

1) Remove the under body tray retaining bolts.

2) Reposition the under body tray.

7 . Remove the support bracket.

8 . Support the exhaust system with suitable stands.

9 . NOTE:

Discard the exhaust system to catalytic converter gaskets.

Using an assistant remove the exhaust system.

www.