Jaguar XJ (X350). Manual — part 839

14 . NOTE:

Left-hand shown, right-hand similar.

Remove and discard the rear subframe rear retaining bolts.

15

.

WARNING: Rotate the special tool height adjustment valve slowly. Failure to

follow this instruction may result in personal injury.

CAUTION: Make sure the rear subframe weight is evenly supported on the special

tool. Failure to follow this instruction may result in damage to the vehicle.

CAUTION: Make sure when lowering the rear subframe damage does not occur to

the surrounding components.

Using the special tool, lower the rear subframe to a maximum of 152mm (6 inch)

Vehicles with supercharger

16 . NOTE:

Rear subframe shown removed for clarity.

Disconnect the fuel pump driver module electrical connector.

17 . NOTE:

Rear subframe shown removed for clarity.

Remove the fuel pump driver module.

Remove the retaining clip.

www.

All vehicles

18 . NOTE:

Rear subframe shown removed for clarity.

Disconnect the evaporative emission canister vent solenoid vent hose.

19 . NOTE:

Rear subframe shown removed for clarity.

Disconnect the evaporative emission canister vent solenoid electrical connector.

20 . NOTE:

Rear subframe shown removed for clarity.

Disconnect the evaporative emission canister vapor pipes.

For additional information, refer to Quick Release Coupling

21 . NOTE:

Rear subframe shown removed for clarity.

Detach the evaporative emission canister.

22 . Remove the evaporative emission canister.

Installation

All vehicles

1 . Install the evaporative emission canister.

www.