Jaguar XJ (X350). Manual — part 436
All vehicles
9 . Install the right-hand catalytic converter.
For additional information, refer to Catalytic Converter - 3.0L/3.5L/4.2L (17.50.05)
10 . Install the right-hand exhaust manifold heat shield upper retaining bolts.
Tighten to 3 Nm.
Flexplate (12.53.13)
Removal
1 . Remove the automatic transmission. For additional information, refer to
For additional information, refer to Transmission - 3.5L/4.2L (44.20.01)
2
.
CAUTION: The bolts can only be used 3 times, mark the bolts with a center punch. If
2 punch marks are visible, discard the bolts.
NOTE:
Prevent the flexplate from rotating.
Remove the flexplate.
Remove the 8 bolts.
Installation
1 . NOTE:
Make sure the crankshaft and flexplate mating faces are clean before installation.
NOTE:
The flexplate will only locate in one position.
www.
NOTE:
Install, but do not tighten, the flexplate retaining bolts.
Install the flexplate.
Prevent the flexplate from rotating.
2 . NOTE:
Tighten the retaining bolts working diagonally.
Tighten to 15 Nm.
3 . NOTE:
Tighten the retaining bolts working diagonally.
Tighten to 110 Nm.
4 . Install the automatic transmission. For additional information, refer to
For additional information, refer to Transmission - 3.5L/4.2L (44.20.01)
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст