Jaguar XJ (X350). Manual — part 435
Remove and discard the retaining nuts and gasket.
9 . NOTE:
Engine shown removed for clarity.
Remove the right-hand exhaust manifold heat shield/gasket retaining bolt.
10 . Remove the exhaust manifold.
Remove and discard the retaining bolts and heat shield/gasket.
Installation
All vehicles
1
.
CAUTION: Make sure that the exhaust manifold and heat shield/gasket is correctly
aligned to cylinder head.
Install the exhaust manifold.
Loosely install new retaining bolts and a new heat shield/gasket.
2 . Tighten the exhaust manifold retaining bolts to 25 Nm.
3 . NOTE:
Engine shown removed for clarity.
Install the right-hand exhaust manifold heat shield/gasket retaining bolt.
Tighten to 50 Nm.
www.
4 . NOTE:
Engine shown removed for clarity.
Attach the EGR valve.
Install new retaining nuts and a new gasket.
Tighten to 22 Nm.
5 . Connect the AIR control valve to exhaust manifold tube.
Tighten to 35 Nm.
6 . Install the right-hand exhaust manifold heat shield
Tighten to 3 Nm.
Right-hand drive vehicles
7 . Install the steering gear coupling.
Tighten the steering gear coupling lower pinch bolt to 35 Nm.
8 . Install the steering gear coupling upper pinch bolt
Tighten to 35 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст