Jaguar XJ (X350). Manual — part 1217

20 . Detach the A/C compressor return line.

Remove and discard the A/C compressor O-ring seal.

Cap the exposed port.

21 . Detach the A/C compressor supply line.

Remove and discard the A/C compressor O-ring seal.

Cap the exposed port.

22 . Remove the A/C compressor.

Installation

All vehicles

1 . Install the A/C compressor.

Tighten to 25 Nm.

2 . NOTE:

Un-cap the exposed ports.

Install new A/C compressor O-ring seals.

Lubricate the new O-rings with A/C refrigerant oil.

3 . Clean off any oil residue that may contain A/C system flourescent dye.

4 . Connect the A/C compressor supply line.

Tighten to 20 Nm.

5 . Connect the A/C compressor return line.

Tighten to 20 Nm.

www.

6 . Connect the A/C compressor electrical connector.

7 . Install the engine mounting and bracket assembly.

Tighten to 25 Nm.

8 . Lower the vehicle.

9 . NOTE:

Vehicles with supercharger shown, vehicles without supercharger similar.

Lower the engine.

1) Adjust the engine support beam.

2) Lower the engine.

10 . Raise the vehicle.

11 . Install the left-hand engine mounting lower retaining nut.

Tighten to 63 Nm.

www.