Jaguar XJ (X350). Manual — part 267
3
.
CAUTION: Make sure the brake tubes are installed to the correct ports. Failure to
follow this instruction may result in damage to the vehicle.
Tighten to 17 Nm.
4
.
Bleed the anti-lock brake system (ABS).
For additional information, refer to
Brake System Bleeding - VIN Range: G45704->H99999
(70.25.03)
Rear Wheel Speed Sensor (70.60.04)
Removal
1 . Raise and support the vehicle.
2
.
CAUTION: Make sure the ignition is in the ‘OFF’ position before disconnecting the
rear wheel speed sensor electrical connector.
Disconnect the rear wheel speed sensor electrical connector.
3 . Remove the rear wheel speed sensor.
Remove the securing bolt.
Installation
1 . To install, reverse the removal procedure.
Tighten to 9 Nm.
www.
Steering Wheel Rotation Sensor (86.56.58)
Removal
1 . Disconnect the battery ground cable.
2 . Remove the steering wheel.
3 . Disconnect the steering wheel rotation sensor electrical connector.
4 . Disconnect the steering wheel rotation sensor electrical wiring harness from steering column.
5 . Remove the steering wheel rotation sensor.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст