Jaguar XJ (X350). Manual — part 1414

Installation

1 . To install, reverse the removal procedure.

B-Pillar Upper Trim Panel (76.13.28)

Removal

1 . Remove the B-pillar lower trim panel.

For additional information, refer to

2 . NOTE:

Left-hand shown, right-hand similar.

Locally detach the front door aperture weatherstrip.

3 . NOTE:

Left-hand shown, right-hand similar.

Locally detach the rear door aperture weatherstrip.

4 . NOTE:

Left-hand shown, right-hand similar.

Remove the front safety belt access cover.

www.

5 . NOTE:

Left-hand shown, right-hand similar.

Detach the front safety belt.

6 . NOTE:

Left-hand shown, right-hand similar.

Remove the B-pillar upper trim panel.

Installation

1
.

WARNING: Make sure the B-pillar upper tangs are located into the slots

in the body below the curtain airbag as this retains the trim in the event of side
airbag deployment.

NOTE:

To guarantee line up of the B-pillar trim and seat belt anchor bolt make sure that
the seat belt slider plate and the B-pillar trim slider plate are at there lowest
positions.

NOTE:

Left-hand shown, right-hand similar.

To install, reverse the removal procedure.

Tighten to 35 Nm.

www.