Jaguar XJ (X350). Manual — part 175
Brake Disc - Vehicles With: High
Performance Brakes, VIN Range: G00442-
>G45703 (70.10.10)
Removal
1
.
Remove the brake pads.
For additional information, refer to
Brake Pads - Vehicles With: High Performance Brakes, VIN
Range: G00442->G45703 (70.40.02)
2 .
CAUTION: The brake caliper must be supported at all times.
Detach the brake caliper and secure to one side.
Remove and discard the brake caliper retaining bolts.
3
.
NOTE:
If the same brake disc is to be installed, the tip of a hub must be marked with a
corresponding part of the brake disc for alignment.
Remove the brake disc.
Remove and discard the brake disc retaining clips.
Installation
1 . To install, reverse the removal procedure.
Tighten to 212 Nm.
www.
Brake Disc - Vehicles With: High
Performance Brakes, VIN Range: G45704-
>G99999 (70.10.10)
Removal
1
.
Remove the brake pads.
For additional information, refer to
Brake Pads - Vehicles With: High Performance Brakes, VIN
Range: G45704->G99999 (70.40.02)
2 . NOTE:
Left-hand shown, right-hand similar.
Remove the brake caliper anchor plate.
Remove and discard the brake caliper anchor plate retaining bolts.
3
.
NOTE:
If the same brake disc is to be installed, the tip of a hub must be marked with a
corresponding part of the brake disc for alignment.
NOTE:
Left-hand shown, right-hand similar.
Remove the brake disc.
Remove and discard the brake disc retaining clips.
Installation
1 .
CAUTION: Brake discs must always be replaced in axle sets.
NOTE:
Left-hand shown, right-hand similar.
To install, reverse the removal procedure.
Tighten to 115 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст