Jaguar XJ (X350). Manual — part 176

Brake Disc (70.10.10) – Armoured

Removal

CAUTION: Brake discs must be renewed in axle sets. Failure to follow this instruction may result in damage to the

vehicle.

CAUTION: If new brake discs are installed, new brake pads must also be installed. Failure to follow this instruction

may result in damage to the vehicle.

1 . Remove the brake pads.

For additional information, refer to

Brake Pads (70.40.02)

2
.

NOTE:

If the same brake disc is to be installed, the tip of a hub must be marked with a corresponding part of the brake disc
for alignment.

Remove the brake disc.

Remove and discard the brake disc retaining clips.

Installation

1 . To install, reverse the removal procedure.

Published: Mar 12, 2014

Vehicles

Brake Disc Shield - Vehicles With: Standard
Brakes (70.10.18)

Removal

1

.

Remove the front brake disc.

For additional information, refer to

Brake Disc - Vehicles With: Standard Brakes, VIN Range:

G00442->G45703 (70.10.10)

For additional information, refer to

Brake Disc - Vehicles With: Standard Brakes, VIN Range:

G45704->G99999 (70.10.10)

2 . Remove the brake disc shield.

Remove and discard the brake disc shield retaining rivets.

Installation

1 . To install, reverse the removal procedure.

Install new brake disc shield retaining rivets.

www.

Brake Disc Shield - Vehicles With: High
Performance Brakes (70.10.18)

Removal

1 . Remove the wheel bearing and wheel hub.

For additional information, refer to

Front Wheel Bearing and Wheel Hub (60.25.03)

2 . Remove the brake disc shield.

Remove and discard the brake disc shield retaining rivets.

Installation

1 . To install, reverse the removal procedure.

Install new brake disc shield retaining rivets.

Brake Pads - Vehicles With: Standard
Brakes, VIN Range: G00442->G45703
(70.40.02)

Removal

1 . Remove both front wheels and tires.

<<204-04>>

2 . Detach the anti-lock brake (ABS) sensor wiring harness from the retaining clips.

3 . Rotate the brake caliper upwards.

1) Remove and discard the brake caliper lower retaining bolt.

2) Rotate the brake caliper upwards.

4 . Remove the brake pads.

www.