Jaguar XJ (X350). Manual — part 479
5 . Connect the ignition coil on-plug electrical connectors.
6 . Connect the positive crank ventilation (PCV) pipe.
Vehicles without supercharger
7 . Attach the right-hand engine wiring harness.
8 . Attach the engine wiring harness.
1) Attach the ground harness.
2) Connect the VCT oil control solenoid electrical connector.
3) Attach the engine wiring harness.
9 . Install the right-hand engine cover bracket.
Tighten to 6 Nm.
Vehicles with supercharger
10 . Attach the engine wiring harness.
11 . Attach the engine wiring harness.
www.
All vehicles
12 . NOTE:
Left-hand shown right-hand similar.
Install the ignition coil-on-plug cover.
Valve Cover RH - VIN Range: G45704-
>G99999 (12.29.44)
Removal
All vehicles
1 . NOTE:
Left-hand shown, right-hand similar.
Remove the ignition coil-on-plug cover.
Vehicles without supercharger
2 . Remove the engine cover right-hand bracket.
All vehicles
3
.
Detach the engine wiring harness.
1) Detach the ground harness.
2)
Disconnect the variable camshaft timing (VCT) oil control solenoid electrical
connector.
3) Detach the engine wiring harness.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст