Jaguar XJ (X350). Manual — part 884

4 . Remove the ECT sensor.

Remove the ECT sensor retaining clip.

Remove and discard the ECT sensor sealing washer.

Installation

1 . To install, reverse the removal procedure.

Install a new ECT sensor sealing washer.

2 . Fill the cooling system up to the MAX mark on the coolant expansion tank.

Fuel Rail Pressure (FRP) Sensor (18.30.98)

Removal

1 . Depressurize the fuel system. <<310-00>>

2 . Remove the fuel rail pressure (FRP) sensor bracket retaining bolt.

3 . Remove the FRP sensor bracket.

4 . NOTE:

Intake manifold shown removed for clarity.

Disconnect the FRP sensor electrical connector and vacuum hose.

www.

5 . NOTE:

Intake manifold shown removed for clarity.

Remove the FRP sensor.

Remove and discard the O-ring seals.

Installation

1 . NOTE:

Intake manifold shown removed for clarity.

To install, reverse the removal procedure.

Install a new O-ring seals.

Tighten to 10 Nm.

2 . Tighten to 6 Nm.

3 . Tighten to 10 Nm.

www.