Jaguar XJ (X350). Manual — part 836
6 . Tighten to 125 Nm.
7 . NOTE:
Left-hand shown, right-hand similar.
Install the rear subframe rear retaining bolt.
Install a new retaining bolt.
Tighten to 125 Nm.
Left-hand shown, right-hand similar.
Tighten to 48 Nm.
9 . Remove the special tool.
10 . NOTE:
Right-hand shown, left-hand similar.
Attach the rear air springs.
Tighten to 133 Nm.
8 . NOTE:
www.
Vehicles with Brembo brakes
11 .
CAUTION: The brake caliper must be supported at all times.
NOTE:
Left-hand shown, right-hand similar.
Attach the brake caliper.
Remove the tie strap.
Install new brake caliper retaining bolts.
Tighten to 70 Nm.
Vehicles without Brembo brakes
12 .
CAUTION: The brake caliper must be supported at all times.
NOTE:
Left-hand shown, right-hand similar.
Remove the tie strap.
13 . NOTE:
Left-hand shown, right-hand similar.
Attach the caliper.
Install new brake caliper retaining bolts.
Tighten to 34 Nm.
All vehicles
14 . Install both rear wheels and tires.
For additional information, refer to Wheel and Tire (74.20.05)
15 . Attach the driveshaft to the rear drive axle flange.
Tighten to 88 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст