Jaguar XJ (X350). Manual — part 835

Left-hand shown, right-hand similar.

Remove and discard the rear subframe rear retaining bolt.

18 . NOTE:

Left-hand shown, right-hand similar.

Remove and discard the rear subframe front retaining bolt.

19

.

CAUTION: Make sure the rear subframe does not come into contact with the fuel

tank filler pipe.

Lower the rear subframe to a suitable height.

17 . NOTE:

20 . Disconnect the emission hose.

Disconnect the carbon canister electrical connector (if equipped).

21 . NOTE:

Rear subframe shown removed for clarity.

Detach the evaporative emission canister.

22 . NOTE:

Remove the evaporative emission canister between the subframe and vehicle body.

Remove the evaporative emission canister.

www.

Installation

All vehicles

1 . NOTE:

Install the evaporative emission canister between the subframe and vehicle body.

Install the evaporative emission canister.

2 . To install, reverse the removal procedure.

Tighten to 7 Nm.

3 . Connect the emission hose.

Connect the carbon canister electrical connector (if equipped).

4 . NOTE:

Left-hand shown, right-hand similar.

Loosely install the rear subframe front retaining bolt.

Install a new retaining bolt.

5 . NOTE:

Left-hand shown, right-hand similar.

Loosely install the noise, vibration and harshness brace retaining bolts.

www.