Range Rover Body Repair Manual — part 27
CHASSIS AND BODY
33
REPAIR
9. Remove handle from front fixing by pivotting rear
end of handle out.
10. Remove gasket from handle.
11. Remove rubber locking plate from door.
12. Remove plastic locking plate from door.
13. Remove screw securing mounting plate to door,
remove plate.
Refit
14. Clean handle and door mating faces.
15. Reverse removal procedure.
PLASTIC SHEET - FRONT DOOR
Service repair no - 76.34.26
Remove
1. Remove front door trim casing.
See this
section.
2. Remove 2 screws securing door outstation ECU.
3. Remove 2 screws securing speaker amplifier.
4. Remove 4 screws securing front door speaker.
5. Release speaker, disconnect multiplug.
6. Remove plastic sheet.
Refit
7. Reverse removal procedure.
76
CHASSIS AND BODY
NEW RANGE ROVER
34
REPAIR
PRIVATE LOCK - FRONT DOOR
Service repair no - 76.37.39
Remove
1. Remove outside handle.
See this section.
2. Fit door lock key.
3. Remove screw securing lock.
4. Remove cam and washer from lock.
5. Remove cam lock and stop from lock.
6. Remove cam return spring. Remove lock from
outside handle.
Refit
7. Apply grease to lock barrel.
8. Fit lock to outside handle.
9. Fit cam return spring, cam stop, cam lock,
washer and cam.
10. Fit screw securing lock to outside handle.
11. Remove door lock key.
12. Refit front door outside handle.
See this
section.
TRIM CASING - FRONT DOOR
Service repair no - 76.34.01
Remove
1. Release cheater panel.
2. Disconnect 2 tweeter speaker connectors,
remove cheater panel.
3. Remove screw securing remote handle
escutcheon, remove escutcheon.
4. Remove 3 screws securing trim casing.
5. Release 12 clips retaining trim casing.
CHASSIS AND BODY
35
REPAIR
6. Disconnect speaker connector.
7. Remove door trim casing.
Disassemble
8. Remove 12 trim casing retaining clips.
9. Remove 4 screws, remove speaker.
10. Remove 4 screws, remove speaker grille.
11. Remove 7 screws, remove trim casing pocket.
12. Remove 3 screws, remove arm rest.
13. Remove retaining clamp and sill button
escutcheon.
76
CHASSIS AND BODY
NEW RANGE ROVER
36
REPAIR
14. Remove door trim casing waist seal.
Assemble
15. Fit door trim casing waist seal.
16. Fit sill button escutcheon, position retaining
clamp, tighten screw.
17. Fit arm rest to trim casing, tighten 3 screws.
18. Fit trim casing pocket, tighten 7 screws.
19. Fit speaker grille to trim casing, tighten 4 screws.
20. Fit speaker to trim, tighten 4 screws.
21. Fit 12 retaining clips.
Refit
22. Connect trim casing speaker connector.
23. Fit trim casing, locating 12 retaining clips.
24. Fit 3 screws securing trim casing.
25. Fit remote handle escutcheon, tighten screw.
26. Position cheater panel, connect 2 tweeter
speaker connectors.
27. Secure cheater panel.
INSERT CAPPING - FRONT DOOR
Service repair no - 76.34.32
Remove
1. Fit protection to door trim casing.
2. Position a blunt flat blade between trim casing
and insert upper edge.
3. Gently raise blade to remove insert.
4. Remove retaining clips from insert.
Refit
5. Fit insert to door casing. Secure with clips.
6. Remove protection from door casing.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст