Discovery (1995+): Body Repair Manual — part 30
76
CHASSIS AND BODY
58
REPAIR
MUD FLAP - REAR - LH
Service repair no - 76.10.85
Remove
1. Remove rear compartment lower trim panel.
See this section.
2. Remove 5 nuts and bolts securing mud flap to
body and bumper valance.
3. Remove mud flap.
Refit
4. Position mud flap to body, fit bolts and tighten
nuts to
10 Nm (7 lbf ft) .
5. Fit rear compartment lower trim panel.
See this
section.
REAR COMPARTMENT LOWER TRIM PANEL - LH
- WITH REAR AIR CONDITIONING FITTED
Service repair no - 76.13.03/20
Remove
1. Remove rear fold down seat.
See this section.
2. Remove fold down rear seat belts.
See this
section.
3. Remove ’E’ post trim casing.
See this section.
4. Release load space cover end sleeve from
mounting bracket.
5. Remove load space cover.
6. Press rear seat squab release button and fold
squab forward.
7. Remove 2 screws securing load space cover
mounting bracket.
8. Remove mounting bracket.
CHASSIS AND BODY
59
REPAIR
9. Remove 5 trim studs securing trim panel.
10. Remove trim panel.
Refit
11. Fit and align trim panel.
12. Fit trim panel retaining studs.
13. Position load space cover mounting bracket and
secure with screws.
14. Fold rear seat squab back and secure to latch.
15. Position load space cover to mounting brackets
and secure.
16. Fit ’E’ post trim casing.
See this section.
17. Fit fold down rear seat belts.
See this section.
18. Fit rear fold down seat.
See this section.
’E’ POST TRIM CASING - RH
Service repair no - 76.13.13/03
Remove
1. Remove rear speaker.
See ELECTRICAL,
Repair.
2. Release 2 ’E’ post finisher retaining studs from
alpine light trim.
3. Release 2 ’E’ post finisher retaining clips from
lower trim panel.
4. Remove ’E’ post finisher.
Refit
5. Position ’E’ post finisher clips to lower trim panel.
6. Secure ’E’ post finisher studs to alpine light trim.
7. Fit rear speaker.
See ELECTRICAL, Repair.
76
CHASSIS AND BODY
60
REPAIR
’E’ POST TRIM CASING - LH - WITH REAR AIR
CONDITIONING FITTED
Service repair no - 76.13.13/20
Remove
1. Remove rear speaker.
See ELECTRICAL,
Repair.
2. Release 2 trim casing retaining screw covers.
3. Remove 2 screws securing trim casing.
4. Remove trim casing.
Refit
5. Fit and align trim casing.
6. Fit and tighten screws securing trim casing and
fit covers.
7. Fit rear speaker.
See ELECTRICAL, Repair.
ALPINE LIGHT TRIM CASING - LH - WITH REAR
AIR CONDITIONING FITTED
Service repair no - 76.13.20/20
Remove
1. Remove ’E’ post trim casing.
See this section.
2. Remove rear seat belt anchorage retaining bolt
cover.
3. Remove bolt securing rear seat belt anchorage.
4. Remove 2 trim studs securing trim casing.
5. Release trim casing from 2 retaining studs.
6. Remove trim casing.
Refit
7. Fit and align trim casing and secure with studs.
8. Fit 2 trim studs securing trim casing.
9. Position seat belt anchorage, fit bolt and tighten
to
20 Nm (15 lbf ft) .
10. Fit cover to seat belt anchorage bolt.
11. Fit ’E’ post trim casing.
See this section.
CHASSIS AND BODY
61
REPAIR
REAR DOOR UPPER TRIM PANEL - WITH REAR
AIR CONDITIONING FITTED
Service repair no - 76.13.72/20
Remove
1. Remove alpine light trim casing.
See this
section.
2. Release 2 trim panel retaining screw covers.
3. Remove 2 trim panel retaining screws.
4. Release rear edge of trim panel from body.
5. Remove screw securing rear header duct to
alpine light duct.
6. Release rear header duct from alpine light duct.
7. Remove trim panel assembly.
Dismantle
8. Remove 2 vents from trim panel.
9. Remove screw securing rear header duct to trim
panel.
10. Remove rear header duct.
Rebuild
11. Fit rear header duct to new trim panel and
secure with screw.
12. Fit vents to trim panel.
Refit
13. Position trim panel and connect rear header duct
to alpine light duct.
14. Fit and tighten screw securing rear header duct
to alpine light duct.
15. Secure rear edge of trim panel to body.
16. Fit and tighten screws securing trim panel.
17. Secure trim panel retaining screw covers.
18. Fit alpine light trim casing.
See this section.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст