Discovery (1995+): Body Repair Manual — part 29
76
CHASSIS AND BODY
54
REPAIR
5. Remove Torx screw securing seat belt.
6. Remove 2 Torx screws securing seat.
7. Disconnect multiplug.
8. Remove seat.
Refit
9. Reverse removal procedure.
10. Tighten Torx screws securing seat to
29 Nm (21
lbf ft) .
11. Tighten bolts securing seat slides to
22 Nm (16
lbf ft) .
12. Tighten Torx screw securing seat belt to
32 Nm
(24 lbf ft) .
FRONT SEAT - MANUAL - 5 DOOR (96 MODELS)
Service repair no - 76.70.01
Remove
1. Raise adjusting bar and slide seat fully
backwards.
2. Remove 2 bolts securing seat slides.
3. Raise adjusting bar and slide seat fully forwards.
4. Remove Torx screw securing seat belt.
5. Remove 2 Torx screws securing seat.
6. Remove seat.
CHASSIS AND BODY
55
REPAIR
Refit
7. Reverse removal procedure.
8. Tighten Torx screws securing seat to
29 Nm (21
lbf ft) .
9. Tighten bolts securing seat slides to
22 Nm (16
lbf ft) .
10. Tighten Torx screw securing seat belt to
32 Nm
(24 lbf ft) .
INTERIOR MIRROR (96 MODELS)
Service repair no - 76.10.51 - Manual
Service repair no - 76.10.54 - Auto dimming
Remove
NOTE: To remove manual mirror, follow
step 8 only.
1. Remove headlining front pocket.
2. Release left hand sun visor from clip and move
aside.
3. Release sun visor clip screw cover.
4. Remove clip securing screw and remove clip.
5. Remove 2 screws securing sunroof ECU and
move ECU aside.
6. Locate mirror multiplug, remove clip and
disconnect multiplug.
7. Remove tape securing harness (behind
headlining).
8. Release mirror from screen by applying sharp
downward pressure to the base.
CAUTION: Do not use tools to assist
removal. Mirror base should be moved in
direction of arrow, parallel to windscreen.
9. Release harness from behind headlining and
remove mirror.
76
CHASSIS AND BODY
56
REPAIR
Refit
10. Reverse removal procedure. Ensure harness is
correctly routed in mirror base so it does not
become trapped.
CHASSIS AND BODY
57
REPAIR
SUN VISOR
Service repair no - 76.10.47
Remove
1. Release sun visor from headlining retaining clip.
2. Remove 3 screws securing sun visor to body.
3. Release sun visor and disconnect multiplug.
4. Remove sun visor.
Refit
5. Position sun visor and connect muliplug.
6. Position sun visor to headlining and secure with
screws.
7. Secure sun visor to headlining clip.
WHEEL ARCH LINER - FRONT
Service repair no - 76.10.48
Remove
1. Raise front of vehicle and support on safety
stand.
2. Remove front road wheel.
3. Remove 4 wheel arch liner retainers.
4. Remove wheel arch liner.
Refit
5. Fit wheel arch liner and secure with retainers.
6. Fit front road wheel and tighten nuts to
126 Nm
(93 lbf ft) .
7. Remove stand and lower vehicle.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст