Discovery 2. Manual — part 234

EXTERIOR FITTINGS

REPAIRS 76-2-17

Grille - front - from 03MY

$% 76.55.03

Remove

1. Remove 3 scrivets securing front grille to

bonnet locking platform.

2. Remove front grille.

NOTE: Do not carry out further dismantling if
component is removed for access only.

3. Remove motif from front grille.

Refit

1. Clean front grille to motif mating face.
2. Fit and secure motif to front grille.
3. Fit front grille and secure with scrivets.

INTERIOR TRIM COMPONENTS

REPAIRS

76-3-1

INTERIOR TRIM COMPONENTS

REPAIRS

Trim casing - tail door speaker

$% 76.13.11

Remove

1. Remove 6 screws securing grille to speaker

trim casing.

2. Remove grille.
3. Remove 4 screws securing trim casing to

speaker assembly.

4. Remove trim casing.

Refit

1. Fit trim casing to speaker assembly and secure

with screws.

2. Fit grille to trim casing and secure with screws.

INTERIOR TRIM COMPONENTS

76-3-2

REPAIRS

Trim casing - side - loadspace

$% 76.13.12

Remove

1. Models with third row seats: Remove third

row seat.

+

SEATS, REPAIRS, Seat - third row.

2. For LH trim casing: Remove accessory

socket.

+

LIGHTING, REPAIRS, Socket -

accessory.

3. Remove 'D' post trim casing.

+

INTERIOR TRIM COMPONENTS,

REPAIRS, Trim casing - 'D' post.

4. Remove screw securing trim cap to trim casing.
5. Release trim cap from trim casing.
6. Models with ICE headphone control panels:

Disconnect multiplug from headphone control
panel and remove trim cap.

7. Partially remove rear door aperture seal.
8. Remove 2 trim clips securing trim casing to

body.

9. Remove access panel.

10. Remove trim clip securing trim casing to lower

'D' post.

11. Models without third row seats: Remove trim

clip from bottom rear corner of trim casing.

12. Release trim casing to gain access to rear seat

belt reel.

13. Remove bolt securing rear seat belt reel to

body.

14. Remove trim casing.

Refit

1. Position trim casing.
2. Fit rear seat belt reel to body and tighten bolt to

50 Nm (37 lbf.ft).

3. Models without third row seats: Fit trim clip

securing bottom rear corner of trim casing.

4. Fit trim clip securing trim casing to lower 'D'

post.

5. Fit access panel to trim casing.
6. Fit trim clips securing trim casing to body.
7. Fit rear door aperture seal.
8. Models with ICE headphone control panels:

Position trim cap and connect multiplug to
headphone control panel.

9. Fit trim cap to trim casing and secure with

screw.

10. Fit 'D' post trim casing.

+

INTERIOR TRIM COMPONENTS,

REPAIRS, Trim casing - 'D' post.

11. Fit accessory socket.

+

LIGHTING, REPAIRS, Socket -

accessory.

12. Models with third row seats: Fit third row

seat.

+

SEATS, REPAIRS, Seat - third row.