Range Rover. Manual — part 323
ELECTRICAL
33
REPAIR
8. Release harness clip from steering column.
9. Release switch multiplug from bracket.
10. Remove ignition switch.
Refit
11. Reverse removal procedure.
INDICATOR - FRONT
Service repair no - 86.40.42
Remove
1. RH indicator only: Release battery cover
fixings. Remove cover.
2. Release lamp retaining clip. Disconnect
multiplug.
86
ELECTRICAL
NEW RANGE ROVER
34
REPAIR
3. Remove indicator unit. Remove bulb holder.
Bulb replacement
4. Rotate bulb holder anti-clockwise. Release from
lamp.
5. Remove bulb from holder.
6. Fit bulb to holder.
7. Position bulb holder to lamp. Rotate clockwise to
secure.
Refit
8. Reverse removal procedure.
ELECTRICAL
35
REPAIR
MAP/COURTESY LAMP - FRONT
Service repair no - 86.45.14
Remove
1. Release lamp unit from headlining.
2. Disconnect lamp multiplug.
3. Remove lamp unit.
Refit
4. Reverse removal procedure.
MOTOR AND CONTROL UNIT - FRONT DOOR
Service repair no - 86.25.01
Remove
1. Remove front door glass.
See CHASSIS AND
BODY, Repair.
2. Disconnect window lift motor harness connector.
3. Remove rivet securing regulator runner to door
panel.
4. Remove 3 rivets securing regulator to door.
Remove regulator assembly.
5. Remove 3 screws securing window lift motor.
Remove motor.
Refit
6. Fit window lift motor to regulator, secure with 3
screws.
7. Fit regulator assembly. Secure with rivets.
8. Align regulator runner to door panel. Secure with
rivet.
9. Reconnect window lift motor harness connector.
10. Refit front door glass.
See CHASSIS AND
BODY, Repair.
86
ELECTRICAL
NEW RANGE ROVER
36
REPAIR
WINDOW MOTOR CONTROL PANEL - REAR
DOOR
Service repair no - 86.25.02
Remove
1. Remove rear door plastic sheet.
See CHASSIS
AND BODY, Repair.
2. Position window to gain access control arm
fixings.
3. Release 5 harness clips from window lift cover
panel.
4. Disconnect harness multiplug from window lift
motor.
5. Disconnect multiplug from window lift switch.
6. Disconnect multiplug from latch solenoid.
7. Remove 3 screws securing door latch.
8. Secure glass with wedge or tape.
9. Remove 2 spring clips securing glass channel
slides to control arms.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст