Range Rover. Manual — part 29
BMW DIESEL
7
REPAIR
7. Release starter feed wire and glow plug relay
feed from battery terminal clamp.
8. Remove 4 bolts securing battery tray. Remove
battery tray.
9. Release earth lead from shock absorber turret.
10. Remove 3 bolts securing fuse box. Lift fuse box
for access.
11. Disconnect engine harness multiplug from base
of fuse box.
12. Release earth wire from valance stud.
13. Disconnect engine harness multiplug from main
harness.
14. Release engine harness clip from valance. Tie
harness aside over engine.
15. Disconnect fuel feed line from fuel heater/filter
head. Remove ’O’ rings and discard.
12
ENGINE
NEW RANGE ROVER
8
REPAIR
16. Release clip. Disconnect fuel return hose from
Fuel Injection Pump (FIP).
17. Disconnect multiplugs from fuel heater and turbo
boost sensor.
18. Position harness aside over engine.
19. Drain cooling system.
See COOLING SYSTEM,
Repair.
20. Discharge air conditioning system.
See AIR
CONDITIONING, Adjustment.
21. Remove cooling fan.
See COOLING SYSTEM,
Repair.
22. Remove engine oil cooler.
See this section.
23. Disconnect gearbox oil cooler. Remove ’O’ rings
and discard. Tie pipes aside on engine.
CAUTION: Where pipes are disconnected,
plug pipes and ports to prevent ingress of
dirt.
24. Disconnect bottom hose from radiator.
25. Disconnect coolant bleed hose from radiator.
BMW DIESEL
9
REPAIR
26. Release 2 fog lamp breather hoses from clips on
either side of radiator.
27. Disconnect 2 heater hoses from engine coolant
pipes.
28. Position container beneath power steering
reservoir to catch spillage.
29. Disconnect return pipe from reservoir. Tie
reservoir aside to engine.
30. Disconnect feed pipe from power steering pump.
Remove sealing washers and discard. Tie pipe
aside to chassis.
31. Remove bolt and screw securing washer bottle
filler neck. Remove filler neck.
12
ENGINE
NEW RANGE ROVER
10
REPAIR
32. Disconnect 2 pipes from air conditioning
condenser. Remove ’O’ rings and discard.
33. Disconnect 2 pipes from air conditioning
compressor. Remove ’O’ rings and discard.
Place pipes aside.
34. Remove 2 nuts and bolts securing radiator
mountings to chassis.
35. Disconnect 2 condenser cooling fan multiplugs.
36. Remove 2 nuts securing air conditioning pipe to
condenser fans. Release pipe.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст