Range Rover. Manual — part 168
PROPELLER SHAFTS
1
REPAIR
PROPELLER SHAFT - FRONT
Service repair no - 47.15.02
Remove
1. Raise vehicle on four post lift.
2. Mark propeller shaft and drive flanges for
reassembly.
3. With assistance, remove 4 nuts and bolts
securing each propeller shaft flange.
NOTE: Raise 1 front road wheel and rotate
propeller shaft as necessary to gain
access to all fixings.
CAUTION: Assistance is necessary to
support propeller shaft when fixings are
removed.
4. Remove propeller shaft.
Refit
5. Clean mating faces of flanges.
6. Position propeller shaft. Align flange markings.
7. Fit bolts and new Nyloc nuts. Tighten to
48 Nm
(35 lbf.ft)
NOTE: Fit bolts with heads toward transfer
box and away from differential.
8. Lower vehicle.
47
PROPELLER SHAFTS
NEW RANGE ROVER
2
REPAIR
PROPELLER SHAFT - REAR
Service repair no - 47.15.03
Remove
1. Raise vehicle on four post lift.
NOTE: Raise road wheel to allow rotation
of propeller shaft.
2. Mark propeller shaft and drive flanges to aid
re-assembly.
3. Remove 4 bolts securing propeller shaft guard to
floor pan. Remove guard.
4. Remove 4 nuts securing propeller shaft to brake
drum.
5. With assistance, remove 4 nuts and bolts
securing propeller shaft to differential drive
flange. Remove shaft.
Refit
6. Ensure mating faces are clean.
7. Position shaft to differential drive flange. Align
marks.
8. Secure with bolts new Nyloc nuts. Tighten to
48 Nm. (35 lbf.ft)
NOTE: Bolts fitted with heads away from
differential.
9. Position shaft to brake drum. Align marks.
Secure with nuts. Tighten to
48 Nm. (35 lbf.ft)
10. Position propeller shaft guard. Secure with bolts.
11. Lower lift.
51 - REAR AXLE AND FINAL DRIVE
CONTENTS
Page
REPAIR
REAR AXLE
1
. . . . . . . . . . . . . . . . . . . . . . . . . . .
DIFFERENTIAL ASSEMBLY
4
. . . . . . . . . . . . . . . . . . . ...
OIL SEAL - PINION
5
. . . . . . . . . . . . . . . . . . . . . . . ..
MASS DAMPER
6
. . . . . . . . . . . . . . . . . . . . . . . . ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст