Range Rover. Manual — part 218
SUPPLEMENTARY RESTRAINT SYSTEM
13
PRECAUTIONS
7. Press both operating buttons to deploy airbag
module.
8. DO NOT return to airbag module for 30 minutes.
9. Using gloves and face mask, remove airbag
module from steering wheel, place airbag
module in plastic bag and seal bag
See Repair.
10. Transport deployed airbag module to designated
area for incineration.
NOTE: DO NOT transport airbag module in
the vehicle passenger compartment.
11. Scrap all remaining parts of SRS system. DO
NOT re-use or salvage any parts of the SRS
system, including steering wheel and steering
column.
Passenger’s airbag module
1. Carry out deployment tool self test.
2. Remove glove box assembly.
See CHASSIS
AND BODY, Repair.
3. Release airbag connector from fascia and
disconnect multiplug.
75
SUPPLEMENTARY RESTRAINT SYSTEM
NEW RANGE ROVER
14
PRECAUTIONS
WARNING: Ensure tool SMD 4082/1 is not
connected to battery.
4. Connect flylead SMD 4082/5 to harness
connector.
5. Connect flylead SMD 4082/5 to tool SMD
4082/1.
WARNING: Ensure airbag module is
secure within fascia.
6. Connect tool SMD 4082/1 to battery.
WARNING: Ensure all personnel are
standing at least 15 metres away from
vehicle.
7. Press both operating buttons to deploy airbag
module.
8. DO NOT return to airbag module for 30 minutes.
9. Using gloves and face mask, remove airbag
module from fascia. Place airbag module in
plastic bag and seal bag.
See Repair.
10. Transport deployed airbag module to designated
area for incineration.
NOTE: DO NOT transport airbag module in
the vehicle passenger compartment.
11. Scrap all remaining parts of SRS system. DO
NOT re-use or salvage any parts of the SRS
system.
SUPPLEMENTARY RESTRAINT SYSTEM
15
PRECAUTIONS
Side airbag modules
1. Carry out deployment tool self test.
2. Remove seat valance
See SEATS, Repair.
3. Release side airbag connector from beneath
seat cushion and disconnect multiplug.
WARNING: Ensure tool SMD 4082/1 is not
connected to battery.
4. Connect deployment tool flylead to seat harness
connector.
5. Connect deployment tool flylead to deployment
tool SMD 4082/1.
6. Connect deployment tool SMD 4082/1 to battery.
WARNING: Ensure all personnel are
standing at least 15 metres away from
vehicle.
75
SUPPLEMENTARY RESTRAINT SYSTEM
NEW RANGE ROVER
16
PRECAUTIONS
7. Press both operating buttons to deploy airbag
module.
8. DO NOT return to airbag module for 30 minutes.
9. Using gloves and face mask, remove airbag
module from seat. Place airbag module in plastic
bag and seal bag.
See Repair.
10. Transport deployed airbag module to designated
area for incineration.
NOTE: DO NOT transport airbag module in
the vehicle passenger compartment.
11. Scrap all remaining parts of SRS system. DO
NOT re-use or salvage any parts of the SRS
system.
Seatbelt pre-tensioners
1. Carry out deployment tool self test.
2. Remove lower ’B’ post finisher.
See CHASSIS
AND BODY, Repair.
3. Release pre-tensioner connector from ’B’ post
mounting and disconnect multiplug.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст