Range Rover. Manual — part 219
SUPPLEMENTARY RESTRAINT SYSTEM
17
PRECAUTIONS
WARNING: Ensure tool SMD 4082/1 is not
connected to battery.
4. Connect deployment tool flylead to seatbelt
pre-tensioner harness connector.
5. Connect deployment tool flylead to deployment
tool SMD 4082/1.
6. Connect deployment tool SMD 4082/1 to battery.
WARNING: Ensure all personnel are
standing at least 15 metres away from
vehicle.
7. Press both operating buttons to deploy airbag
module.
8. DO NOT return to seatbelt pre-tensioner module
for 30 minutes.
9. Using gloves and face mask, remove seatbelt
pre-tensioner unit from vehicle. Place seatbelt
pre-tensioner unit in plastic bag and seal bag.
See Repair.
10. Transport deployed seatbelt pre-tensioner unit to
designated area for incineration.
NOTE: DO NOT transport seatbelt
pre-tensioner unit in the vehicle passenger
compartment.
11. Scrap all remaining parts of SRS system. DO
NOT re-use or salvage any parts of the SRS
system.
75
SUPPLEMENTARY RESTRAINT SYSTEM
NEW RANGE ROVER
18
PRECAUTIONS
Deployment with module removed from vehicle
These guidelines are written to aid authorised
personnel to carry out the safe disposal of airbag
modules when they are removed from the vehicle.
WARNING: Only use Land Rover approved
deployment equipment. Deploy airbag
modules in a well ventilated, designated
area.
Driver’s airbag module
1. Carry out deployment tool self test.
2. Remove airbag module from steering wheel.
See Repair.
3. Position tool SMD 4082/2 in vice, ensuring that
vice jaws grip tool above bottom flange to
prevent possibility of tool being forced upwards
from vice. Tighten vice.
4. Secure airbag module to tool SMD 4082/2.
Ensure module is correctly secured using both
fixings.
5. Ensure airbag module mounting brackets are
secure.
SUPPLEMENTARY RESTRAINT SYSTEM
19
PRECAUTIONS
WARNING: Ensure tool SMD 4082/1 is not
connected to battery.
6. Connect flylead SMD 4082/4 to airbag module.
7. Connect flylead SMD 4082/4 to tool SMD
4082/1.
WARNING: Do not lean over module whilst
connecting.
8. Connect tool SMD 4082/1 to battery.
WARNING: Ensure all personnel are
standing at least 15 metres away from
module.
9. Press both operating buttons to deploy airbag
module.
10. DO NOT return to airbag module for 30 minutes.
11. Using gloves and face mask, remove airbag
module from tool SMD 4082/2, place airbag
module in plastic bag and seal bag.
12. Wipe down tool SMD 4082/2 with damp cloth.
13. Transport deployed airbag module to designated
area for incineration.
NOTE: DO NOT transport airbag module in
the vehicle passenger compartment.
75
SUPPLEMENTARY RESTRAINT SYSTEM
NEW RANGE ROVER
20
PRECAUTIONS
Passenger’s airbag module
1. Carry out deployment tool self test.
2. Remove airbag module from fascia.
See
Repair.
3. Position tool SMD 4082/6 in vice, ensuring that
vice jaws grip tool above bottom flange to
prevent possibility of tool being forced upwards
from vice. Tighten vice.
4. Position brackets SMD 4082/7 to tool; lightly
tighten bolts.
5. Secure airbag module to tool SMD 4082/6.
Ensure module is correctly secured using all
fixings.
6. Ensure airbag module mounting brackets are
secure.
WARNING: Ensure tool SMD 4082/1 is not
connected to battery.
7. Connect flylead SMD 4082/5 to airbag module.
8. Connect flylead SMD 4082/5 to tool SMD
4082/1.
WARNING: Do not lean over module whilst
connecting.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст