Range Rover. Manual — part 326
ELECTRICAL
45
REPAIR
16. Remove 2 nuts securing driver side heater
blower to fascia.
17. Position blower and disconnect 2 multiplugs and
1 Lucar from unit.
18. Remove blower unit.
19. Release 2 clips securing harness duct to lower
RH fascia.
20. Disconnect 2 multiplugs from instrument pack.
21. Disconnect multiplug from cruise control ECU.
22. Release cruise control relay from fascia bracket
and remove relay.
86
ELECTRICAL
NEW RANGE ROVER
46
REPAIR
23. Remove 4 screws securing heater control unit to
fascia.
24. Position heater control unit and disconnect 4
multiplugs from unit.
25. Remove heater control unit.
26. Remove 5 screws securing fascia switch pack to
fascia.
27. Position fascia switch pack and disconnect 7
multiplugs and 2 Lucars from rear of switch
pack. Do not disconnect multiplug from high/low
switch.
28. Remove fascia switch pack.
29. Release 3 clips securing harness to fascia.
30. Remove fascia harness.
ELECTRICAL
47
REPAIR
Refit
31. Position fascia harness to fascia.
32. Position harness to fascia and secure with clips.
33. Position fascia switch pack and connect
multiplugs and Lucars.
34. Align switch pack to fascia and secure with
screws.
35. Position heater control unit and connect
multiplugs.
36. Align heater controls to fascia and secure with
screws.
37. Fit cruise control relay to harness and secure to
fascia bracket.
38. Connect cruise control ECU multiplug.
39. Connect multiplugs to instrument pack.
40. Position harness duct and secure with clips.
41. Position driver side blower unit and connect
multiplugs and Lucar.
42. Align blower unit to fascia and secure with nuts.
43. Connect multiplug to heater matrix pipe sensor.
44. Connect multiplug to evaporator sensor.
45. Position harness to evaporator and secure with
clips.
46. Position harness to sunlight sensor and connect
multiplugs.
47. Secure harness to fascia with clip.
48. Position sunlight sensor multiplug inside fascia.
49. Position passenger airbag harness to fascia and
secure with clips.
50. Position harness to LH lower fascia and secure
with clips.
51. Fit heater duct to heater.
52. Position passenger’s side heater blower and
connect multiplugs and Lucar.
53. Fit blower unit to heater duct and fascia and
secure with nuts.
54. Fit passenger airbag module.
See
SUPPLEMENTARY RESTRAINT SYSTEM,
Repair.
55. Fit fascia assembly.
See CHASSIS AND
BODY, Repair.
HORN - FROM 99MY
Service repair no - 86.30.10
Remove
1. Release fixings and remove battery cover.
2. Disconnect battery earth lead.
3. RH horn: Remove battery positive lead and
remove battery.
4. RH horn: Remove 2 screws securing harness
clamp to carrier and release harnesses from
carrier.
5. RH horn: Remove 4 bolts securing battery
carrier to body and remove carrier.
6. Release multiplug from horn.
7. Remove nut securing horn to bracket and
remove horn.
Refit
8. Fit new horn to bracket and tighten nut to
13 Nm
(10 lbf.ft).
9. Connect multiplug to horn.
10. RH horn: Fit battery carrier and secure with
bolts.
11. RH horn: Position harnesses and secure clamp
with screws.
12. RH horn: Fit battery and connect positive lead.
13. Connect battery earth lead.
14. Fit battery cover and secure with fixings.
86
ELECTRICAL
NEW RANGE ROVER
48
REPAIR
AUXILIARY POWER SOCKET - FROM 2000MY
Service repair no - 86.65.62
Remove
1. Remove screw securing power socket to
mounting bracket.
2. Release clip securing power socket to power
socket bracket and remove bracket.
3. Disconnect 1 multiplug and 1 lucar from power
socket and remove socket.
Refit
4. Position socket and bracket and connect lucar
and multiplug.
5. Secure socket to mounting bracket with clip and
screw.
HARNESS - ENGINE - V8 - FROM 99MY
Service repair no - 86.70.17
Remove
1. Remove alternator drive belt.
See this section.
2. Remove ignition coils.
See ENGINE
MANAGEMENT SYSTEM, Repair.
3. Remove ignition ECM.
See ENGINE
MANAGEMENT SYSTEM, Repair.
4. Disconnect MAF sensor multiplug.
5. Disconnect A/C compressor multiplug.
6. Remove 4 bolts securing A/C compressor,
release compressor and tie aside.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст