Frelander 2. Manual — part 68
Rear Suspension - Wheel Knuckle Rear Bushing
Removal and Installation
Special Tool(s)
204-620-01
Installer, Wheel Knuckle Bushing
204-620-02
Remover/Installer, Wheel Knuckle Bushing
204-620-03
Remover, W heel Knuckle Bushing
LR-121
Hydraulic Cylinder 10t
Removal
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Remove the wheel and tire.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
2.
Remove the trailing arm.
Refer to:
Trailing Arm
(204-02 Rear Suspension, Removal and
Installation).
3.
4.
CAUTION: Mark the components to aid
installation.
Remove the bushing.
Special Tool(s):
LR-121
,
204-620-02
,
204-620-03
4.
Installation
1.
CAUTION: Make sure that the installation
marks are aligned.
1.
2.
CAUTION: Make sure the correct special tool is
used to install the bushings to the correct depth.
Install the bushing.
Special Tool(s):
LR-121
,
204-620-01
,
204-620-02
2.
Install the trailing arm.
Refer to:
Trailing Arm
(204-02 Rear Suspension, Removal and
Installation).
3.
Install the wheel and tire.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
4.
Wheels and Tires -
Wheel Type
• CAUTIONS:
CAUTION: With reduced size spare wheel fitted, do not exceed 50 mph (80 km/h) and replace with standard size
wheel at earliest opportunity.
CAUTION: Do not use power tools when operating the spare wheel winch, raise and lower winch manually using hand
tools only.
Item
Specification
Alloy
6.5J x 16
Alloy
7.5J x 17
Alloy
8.0J x 18
Steel
7.0 J X 17
Alloy wheel (Accessory)
8.5J x 19
Steel wheel (Spacesaver)
4.0J x 17
Tire Sizes - Standard Fit
CAUTION: CAUTION: Inner tubes must not be fitted with any of these tires.
Wheel Size
Tire Size
Load index & Speed Rating
6.5J x 16
215/75 R16
103H or 107H
7.5J x 17
235/65 R17
104V or 108V
7.0J X 17
235/65 R17
103H
8.0J x 18
235/60 R18
103V OR 107V
4.0J x 17
135/90 R17
Tire Sizes - Accessory Fit
CAUTION: CAUTION: Inner tubes must not be fitted with any of these tires.
Wheel Size
Tire size
Speed Rating
8.0J x 19
235/55 R19
105V
Tire Pressures
Loading condition
bar
lb/in²
All conditions - Vehicle loaded to maximum vehicle gross weight:
Front
2.2
32
Rear
2.2
32
Spacesaver spare wheel
2.2
32
Standard size spare wheel
2.2
32
19" Accessory wheel
2.4
35
Recommended Lubricant
Item
Land Rover Part No.
W heel hub spigot
RYL 105020
Torque Specifications
Description
Nm
lb-ft
Road wheel nuts*
133
98
Tire low pressure sensor
8
6
* Road wheel nuts must be tightened by diagonal selection
Wheels and Tires - Wheels and Tires
Description and Operation
OVERVIEW
A number of alloy and steel wheel and tire size combinations are available. A Tire Pressure Monitoring System (TPMS) is
also available. The system monitors the pressure in each tire and informs the driver if the pressure falls below
predetermined thresholds.
WHEELS
Item
Part Number
Description
A
-
6.5J X 16
B
-
7.5J X 17 - Style 1
C
-
7.5J X 17 - Style 2
D
-
8.0J X 18
E
-
8JX 19 (From 2009MY)
F
-
7J X 17 - Steel
The spare wheel fitted is a full size 7J X 17 steel wheel and uses a 225/65 R17 tire.
On vehicles from 2009MY a 8J X 19 alloy wheel is available and uses a 235/55 R19 tire. A 10 spoke chrome shadow 8J X 19
alloy wheel fitted with a 235/55R19 tire is also available as an optional fitment.
TIRES
Tires are available in a number of sizes and tread patterns dependent on vehicle usage. Tire sizes are as follows:
215/75R16
225/65 R17
235/65R17
235/60R18
235/55R19.
WARNING: Tires should be inflated to the recommended pressures (as given in the Owners Handbook) only when the
tires are cold (ambient temperature). If the tires have been subjected to use or exposed to direct sunlight, move the
vehicle into a shaded position and allow the tires to cool before checking/adjusting the pressures.
Tire Changing
On vehicles fitted the TPMS, care must be taken when removing and refitting tires to ensure that the tire pressure sensor
is not damaged.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст