Frelander 2. Manual — part 67
Rear Suspension - Shock Absorber and Spring Assembly
Removal and Installation
Removal
Remove the rear quarter trim panel.
Refer to:
Rear Quarter Trim Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
1.
2.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
2.
Remove the wheel and tire.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
3.
4.
CAUTION: Make sure that no load is placed on
the brake hose.
4.
5.
CAUTION: Discard the nut.
5.
Remove and discard the bolt from the rear wheel
knuckle.
6.
7.
8.
9.
CAUTION: Make sure that no components
catch.
9.
10.
Installation
1.
CAUTION: Make sure that new bolts are installed.
Install the shock absorber to the hub assembly.
Torque: 110 Nm
1.
Install the shock absorber and spring assembly.
Torque: 32 Nm
2.
3.
CAUTION: Nuts and bolts must be tightened with the weight
of the vehicle on the suspension.
Install the lower suspension arms.
3.
Install the brake line and wheel speed sensor brackets.
Torque: 10 Nm
4.
5.
WARNING: Make sure that a new nut is installed.
Secure the stabilizer bar link.
Torque: 60 Nm
5.
6. CAUTIONS:
Make sure that the mating faces are clean and free of foreign
material.
Make sure that the brake hose is not twisted and is correctly
located.
Secure the brake caliper and anchor plate to the wheel knuckle.
Torque: 110 Nm
6.
7.
CAUTION: Nuts and bolts must be tightened with the weight
of the vehicle on the suspension.
Support weight of vehicle on a jack at the rear hub.
7.
Tighten the trailing arm nut and bolt.
8.
Torque: 270 Nm
Tighten the front and rear lower arm nuts and bolts.
Torque: 175 Nm
9.
Install the wheel and tire.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
10.
Install the rear quarter trim panel.
Refer to:
Rear Quarter Trim Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
11.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст