Frelander 2. Manual — part 565
Installation
Install the rear door window fixed glass and tighten the nuts and
Torx screws evenly.
Torque: 5 Nm
1.
Install the door frame trim.
2.
Install the rear door trim panel.
Refer to:
Rear Door Trim Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
3.
Connect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
4.
Instrument Panel and Console -
Torque Specifications
Description
Nm
lb-ft
Instrument panel:
M8 Bolts
24
18
M12 Bolts
40
30
Instrument panel console switch
3
2
Instrument panel Torx bolts
3
2
ECM Bracket
10
7
Instrument Panel and Console - Instrument Panel
Description and Operation
COMPONENT LOCATION
Item Part Number
Description
1
-
Steering column mounting
2
-
Passenger air bag
3
-
Cross car beam
4
-
Passenger side energy absorbing bracket - North American Specification (NAS) vehicles only
5
-
Center console mounting
6
-
Floor console support
7
-
Driver side energy absorbing assembly
OVERVIEW
The instrument panel incorporates a tubular steel cross car beam. An energy absorbing assembly is bolted to the drivers
side of the cross car beam. The energy absorbing assembly comprises 2 deformable brackets welded to a cross brace. NAS
vehicles also feature a single energy absorbing bracket bolted to the passenger side of the cross car beam.
Secured to the center of the cross car beam is a cast magnesium structure which provides support and mounting points for
the center console. Mounted on the driver side of the cross car beam is the steering column support, which is also
manufactured from magnesium. The cross car beam also provides a mounting point for the dual stage passenger air bag.
For additional information, refer to:
Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS)
(501-20B
Supplemental Restraint System, Description and Operation).
The instrument panel consists of 2 plastic moldings (upper and lower) which are welded together to provide a single
assembly. The instrument panel provides mounting points for various driver and passenger interfaces. Also contained
within the instrument panel are the air distribution ducts, vents and registers.
For additional information, refer to:
Air Distribution and Filtering
(412-01 Climate Control, Description and Operation).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст