Frelander 2. Manual — part 566
Instrument Panel and Console - Instrument PanelTD4 2.2L Diesel
Removal and Installation
Removal
Make the SRS system safe.
Refer to: Supplemental Restraint System (SRS) Depowering and
Repowering (501-20, General Procedures).
1.
Remove the windshield wiper motor.
Refer to:
Windshield Wiper Motor
(501-16 W ipers and Washers,
Removal and Installation).
2.
Evacuate the A/C system.
Refer to:
Air Conditioning (A/C) System Recovery, Evacuation and
Charging
(412-00 Climate Control System - General Information,
General Procedures).
3.
Remove both front door assemblies.
Refer to:
Front Door
(501-03 Body Closures, Removal and
Installation).
4.
Remove both A-pillar upper trim panels.
Refer to:
A-Pillar Trim Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
5.
Remove the A-pillar center trim panels.
6.
Release the forward edge of both scuff plate trim
panels.
7.
Remove both cowl side trim panels.
Refer to:
Cowl Side Trim Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
8.
Remove the LH front seat.
Refer to:
Front Seat
(501-10 Seating, Removal and Installation).
9.
Remove the transmission selector lever.
Refer to:
Selector Lever Assembly
(307-05 Automatic
Transmission/Transaxle External Controls, Removal and
Installation).
10.
11.
Remove both floor console extensions.
12.
13.
CAUTION: Cover fiber optic cable connectors
to minimize dust ingress and avoid bending the cables
in a radius of more than 30 mm.
13.
Release the earth lead.
14.
Release the instrument panel harness from the
transmission tunnel.
15.
Remove the auxiliary junction box access cover.
16.
17. NOTE: LHD illustration shown, RHD is similar.
Release the instrument panel wiring harness.
17.
18.
Remove both of the center, lower ducts from the heater
housing.
19.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст