Frelander 2. Manual — part 680
Uni-Body, Subframe and Mounting System - Rear Subframe Front Bushing
Removal and Installation
Special Tool(s)
204-598
Hydraulic Cylinder 10t
204-598-01
Remover/Installer, Subframe Bushing Guide
Removal
• NOTE: Removal steps in this procedure may contain installation details.
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Remove both rear wheels and tires.
Refer to:
Wheel and Tire
(204-04 Wheels and Tires, Removal and
Installation).
2.
Remove the rear subframe assembly for access.
Refer to:
Rear Subframe
(502-00 Uni-Body, Subframe and Mounting
System, Removal and Installation).
3.
4. CAUTIONS:
Mark the components to aid installation.
Special tool 204-598-01/8 is used to start the
bushing removal process, and must be removed after
the bushing has released, as it will not pass through
the subframe bushing aperture.
Remove the bushing.
Special Tool(s):
204-598
,
204-598-01
4.
Installation
1. CAUTIONS:
Make sure the correct special tool is used to
install the bushings to the correct depth.
Make sure that the installation marks are
aligned.
Install the bushing.
Special Tool(s):
204-598
,
204-598-01
1.
Install the rear subframe assembly.
Refer to:
Rear Subframe
(502-00 Uni-Body, Subframe and Mounting
System, Removal and Installation).
2.
Install the wheels and tires.
Refer to:
Wheel and Tire
(204-04 Wheels and Tires, Removal and
Installation).
3.
Uni-Body, Subframe and Mounting System - Rear Subframe Rear Bushing
Removal and Installation
Special Tool(s)
204-598
Hydraulic Cylinder 10t
204-598-01
Remover/Installer, Subframe Bushing Guide
Removal
• NOTE: Removal steps in this procedure may contain installation details.
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Remove both rear wheels and tires.
Refer to:
Wheel and Tire
(204-04 Wheels and Tires, Removal and
Installation).
2.
Remove the rear subframe assembly for access.
Refer to:
Rear Subframe
(502-00 Uni-Body, Subframe and Mounting
System, Removal and Installation).
3.
4. CAUTIONS:
Mark the components to aid installation.
Special tool 204-598-01/8 is used to start the
bushing removal process, and must be removed after
the bushing has released, as it will not pass through
the subframe bushing aperture.
Remove the bushing.
Special Tool(s):
204-598-01
4.
Installation
1. CAUTIONS:
Make sure the correct special tool is used to
install the bushings to the correct depth.
Make sure that the installation marks are
aligned.
Install the bushing.
Special Tool(s):
204-598
,
204-598-01
1.
Install the rear subframe assembly.
Refer to:
Rear Subframe
(502-00 Uni-Body, Subframe and Mounting
System, Removal and Installation).
2.
Install the wheels and tires.
Refer to:
Wheel and Tire
(204-04 Wheels and Tires, Removal and
Installation).
3.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст