Frelander 2. Manual — part 585
Handles, Locks, Latches and Entry Systems - Liftgate Latch
Removal and Installation
Removal
Remove the liftgate trim panel.
Refer to:
Liftgate Trim Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
1.
Torque: 25 Nm (18 lb.ft).
2.
Installation
To install, reverse the removal procedure.
1.
Handles, Locks, Latches and Entry Systems - Exterior Front Door Handle
Removal and Installation
Removal
• NOTE: This procedure details removal and installation of both the LH and RH exterior front door handles.
• NOTE: If the exterior handle is to be removed in conjunction with additional door internal items, then it is recommended
that the screw cover and exterior handle be released from the inside of the door.
LH side: Remove the private lock.
Refer to:
Door Lock Cylinder
(501-14 Handles, Locks, Latches and
Entry Systems, Removal and Installation).
1.
RH side: Release the 2 clips.
2.
To remove the exterior front door handle, without
removal of the door trim pad.
3.
To remove the exterior front door handle, after removal
of the door trim pad and regulator.
4.
Installation
To install, reverse the removal procedure.
1.
Use a length of cord to hold the lock lever against
spring pressure, while engaging the outside handle.
2.
Handles, Locks, Latches and Entry Systems - Exterior Rear Door Handle
Removal and Installation
Removal
• NOTE: If the exterior handle is to be removed in conjunction with additional door internal items, then it is recommended
that the screw cover and exterior handle be released from the inside of the door, after removal of the door trim pad,
regulator and motor.
Release the 2 clips.
1.
To remove the exterior rear door handle, without
removal of the door trim pad.
2.
To remove the exterior rear door handle, after removal
of the door trim pad and regulator.
3.
Installation
To install, reverse the removal procedure.
1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст