Frelander 2. Manual — part 216
Engine - TD4 2.2L Diesel - Cylinder Head
Removal and Installation
Removal
• NOTE: The valve cover and cylinder head is machined as an assembly and cannot be serviced separately.
Remove the cover and disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
2.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
2.
Remove the exhaust manifold.
Refer to:
Exhaust Manifold
(303-01B Engine - TD4 2.2L Diesel,
Removal and Installation).
3.
Remove the camshafts.
Refer to:
Camshafts
(303-01B Engine - TD4 2.2L Diesel, Removal
and Installation).
4.
Remove the thermostat.
Refer to:
Thermostat
(303-03B Engine Cooling - TD4 2.2L Diesel,
Removal and Installation).
5.
Remove the RH engine mount.
Refer to:
Engine Mount RH
(303-01B Engine - TD4 2.2L Diesel,
Removal and Installation).
6.
7.
8.
9.
10.
11.
CAUTION: Note the fitted position of the
component prior to removal.
11.
12.
WARNING: This step requires the aid of
another technician.
Discard the bolts.
12.
13. CAUTIONS:
Note the thickness of the gasket removed.
The gasket thickness is identified by the number
of holes (1 to 4) at either of the locations shown.
13.
14.
15. NOTE: Do not disassemble further if the component
is removed for access only.
15.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст