Frelander 2. Manual — part 333
Release the power steering pump mounting bracket.
20.
Release the power steering pump and tie aside
21.
Disconnect the 2 transmission fluid cooler coolant
hoses.
22.
Release the automatic transmission fluid cooler.
23.
Support the engine.
Special Tool(s):
303-021
,
303-662
24.
Support the transmission.
General Equipment:
Powertrain Jack
25.
26.
WARNING: Make sure that new nuts are
installed.
• NOTE: Vehicles with automatic transmission have a
breather pipe attached to the mounting.
Remove the bracket.
26.
Remove the LH engine mount.
27.
Remove the engine mount bracket.
28.
Remove the 9 transmission bolts.
29.
30.
CAUTION: Make sure that the torque converter remains in
the transmission.
• NOTE: This step requires the aid of another technician.
Remove the transmission and converter.
30.
31.
CAUTION: Make sure that the dowels are still located on
the engine and not the transmission.
Install the torque converter retainer.
31.
32.
CAUTION: Be prepared to collect escaping
fluids.
• NOTE: Do not disassemble further if the component is
removed for access only.
Remove the transmission fluid cooler.
32.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст