Frelander 2. Manual — part 77
Item
Part Number
Description
1
-
Driveshaft
OVERVIEW - TD4 MANUAL AND SI6 (UP TO VIN 180237) AND TD4 AUTO.
Item
Part Number
Description
1
-
Fixed constant velocity joint
2
-
Long plunge double-offset joint
3
-
Center bearing
4
-
Center bearing
5
-
Universal joint
6
-
Plunging constant velocity joint
OVERVIEW - TD4 MANUAL AND SI6 (FROM VIN 180238)
Item
Part Number
Description
1
-
Fixed constant velocity joint
2
-
Long plunge double-offset joint
3
-
Center bearing
4
-
Plunging constant velocity joint
Manufactured from high-strength thin-walled tubular steel to minimize weight, the driveshaft incorporates crash energy
management features, designed to collapse progressively and predictably in the event of a severe frontal impact. These
features include:
swaged construction of the front section which allows the section to collapse, and a
sophisticated long-plunge double-offset joint at the rear of the front section, which absorbs the energy of the
impact.
The driveshaft is supported by either 1 or 2 high stiffness, center bearings manufactured from pressed steel with riveted
aluminum heatshield assemblies.
Driveshaft - Universal Joints
Description and Operation
For additional information, refer to:
Driveshaft
(205-01 Driveshaft, Description and Operation).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст