Frelander 2. Manual — part 330
Automatic Transmission/Transaxle - Input Shaft Speed (ISS) SensorI6 3.2L
Petrol
Removal and Installation
Removal
CAUTION: Extreme cleanliness must be exercised when handling these components.
• NOTE: Removal steps in this procedure may contain installation details.
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Remove the valve body.
Refer to:
Main Control Valve Body
(307-01 Automatic
Transmission/Transaxle, Removal and Installation).
2.
3.
CAUTION: Extreme cleanliness must be
exercised when handling this component.
Torque: 6 Nm
3.
Installation
To install, reverse the removal procedure.
1.
Automatic Transmission/Transaxle - Transmission Fluid Pan, Gasket and
Filter
Removal and Installation
Removal
Remove the cover and disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
2.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
2.
Drain the transmission fluid.
Refer to:
Transmission Fluid Drain and Refill - I6 3.2L Petrol
(307-01
Automatic Transmission/Transaxle, General Procedures).
3.
Remove the front subframe assembly.
Refer to:
Front Subframe
(502-00 Uni-Body, Subframe and Mounting
System, Removal and Installation).
4.
5.
CAUTION: Be prepared to collect escaping oil.
5.
Remove the gasket.
6.
Installation
For sealant specification, refer to the specifications section.
Refer to:
Specifications
(307-01 Automatic Transmission/Transaxle,
Specifications).
1.
Apply a bead of sealant, 3 mm diameter, to the area
indicated.
2.
Install the fluid pan.
Torque: 14 Nm
3.
Install the front subframe.
Refer to:
Front Subframe
(502-00 Uni-Body, Subframe and Mounting
System, Removal and Installation).
4.
Connect the battery ground cable and install the cover.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
5.
Refill the transmission with fluid.
Refer to:
Transmission Fluid Drain and Refill - I6 3.2L Petrol
(307-01
Automatic Transmission/Transaxle, General Procedures).
6.
Automatic Transmission/Transaxle - Transmission Fluid Pan
Removal and Installation
Removal
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Drain the transmission fluid.
Refer to:
Transmission Fluid Drain and Refill - I6 3.2L Petrol
(307-01
Automatic Transmission/Transaxle, General Procedures).
2.
Remove the front subframe assembly.
Refer to:
Front Subframe
(502-00 Uni-Body, Subframe and Mounting
System, Removal and Installation).
3.
4.
CAUTION: Be prepared to collect escaping oil.
4.
Remove the gasket.
5.
Installation
For sealant specification, refer to the specifications section.
Refer to:
Specifications
(307-01 Automatic Transmission/Transaxle,
Specifications).
1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст