Frelander 2. Manual — part 530
Remove the loadspace stowage tray.
4.
Remove the loadspace securing ring.
5.
Release the rear quarter trim panel.
6.
Remove the D-pillar trim panel.
7.
8. NOTE: Do not disassemble further if the component
is removed for access only.
Remove the speaker.
8.
Installation
Install the speaker
1.
Install the D-pillar trim panel.
2.
Secure the rear quarter trim panel.
3.
Install the loadspace securing ring and tighten the Torx screw.
Torque: 25 Nm
4.
Install the loadspace stowage tray.
5.
Attach the liftgate seal.
6.
Install the loadspace scuff plate.
7.
Install the spare wheel cover.
8.
Interior Trim and Ornamentation - Front Door Trim Panel
Removal and Installation
Removal
Remove the grab handle cover.
1.
Remove the front door trim panel.
2.
3. NOTE: Do not disassemble further if the component
is removed for access only.
Remove the puddle lamp.
3.
Remove the front door latch remote control handle.
4.
Remove the window control switch.
5.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст