Frelander 2. Manual — part 528

Interior Trim and Ornamentation - A-Pillar Trim Panel

Removal and Installation

Removal

1.

2. NOTE: Do not disassemble further if the component
is removed for access only.

2.

Installation

1.

CAUTION: The airbag tether is mounted under this

component. Do not trap during installation.

Install the A-pillar trim panel and tighten the new Torx screw to 3
Nm (2.2 lb.ft).

1.

Interior Trim and Ornamentation - B-Pillar Upper Trim Panel

Removal and Installation

Removal

• NOTE: Removal steps in this procedure may contain installation details.

Remove the B-pillar lower trim panel.

Refer to:

B-Pillar Lower Trim Panel

(501-05 Interior Trim and

Ornamentation, Removal and Installation).

1.

2.

WARNING: Make sure that a new bolt is

installed.

Torque: 40 Nm

2.

Torque: 25 Nm

3.

4. NOTE: Do not disassemble further if the component
is removed for access only.

4.

5.

Installation

To install, reverse the removal procedure.

1.

Interior Trim and Ornamentation - B-Pillar Lower Trim Panel

Removal and Installation

Removal

1.

2. NOTE: Do not disassemble any further if the
component is removed for access only.

2.

Installation

To install, reverse the removal procedure.

1.