Frelander 2. Manual — part 127
Anti-Lock Control - Front Wheel Speed Sensor
Removal and Installation
Removal
Raise and support the vehicle.
1.
Remove the front wheel and tire.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
2.
Release the fender splash shield.
Refer to:
Fender Splash Shield
(501-02 Front End Body Panels,
Removal and Installation).
3.
4.
Torque: 5 Nm
5.
Installation
To install, reverse the removal procedure.
1.
If a new component is to be installed, configure using IDS.
2.
Anti-Lock Control - Rear Wheel Speed Sensor
Removal and Installation
Removal
• NOTE: Removal steps in this procedure may contain installation details.
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Remove the rear wheel and tire.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
2.
3.
4.
Torque: 5 Nm
5.
Installation
To install, reverse the removal procedure.
1.
If a new component is to be installed, configure using Land Rover
approved diagnostic equipment.
2.
Anti-Lock Control - Traction Control - Anti-Lock Control - Traction Control
Description and Operation
OVERVIEW
The anti-lock control - traction control section is incorporated within the anti-lock control - stability assist section of the
workshop manual.
For additional information, refer to:
Anti-Lock Control - Stability Assist
(206-09C Anti-Lock Control - Stability Assist,
Description and Operation).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст