Frelander 2. Manual — part 370
Manual Transmission/Transaxle External Controls - Gearshift Lever Knob
Removal and Installation
Removal
1.
2.
WARNING: The selector lever knob will be
released suddenly, keep face clear during removal.
2.
Installation
To install, reverse the removal procedure.
1.
Manual Transmission/Transaxle External Controls - Gearshift Cables
Removal and Installation
Removal
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Remove the driveshaft.
Refer to:
Driveshaft - Vehicles W ithout: Diesel Particulate Filter
(DPF)
(205-01 Driveshaft, Removal and Installation).
2.
Remove the floor console.
Refer to:
Floor Console
(501-12 Instrument Panel and Console,
Removal and Installation).
3.
Remove the air cleaner assembly.
Refer to:
Air Cleaner
(303-12A Intake Air Distribution and Filtering -
I6 3.2L Petrol, Removal and Installation).
4.
Remove the instrument panel, lower trim panels.
5.
6.
Remove the RH instrument pack lower bracket.
7.
8. NOTE: Neutral must be selected before the cables
are released to allow the cables to be correctly set on
the install.
8.
9.
10.
Release the cable sealing plate.
11.
12.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст