Frelander 2. Manual — part 369
Manual Transmission/Transaxle External Controls - Gearshift Linkage
Removal and Installation
Removal
Remove the cover and disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
Remove the air cleaner assembly.
Refer to:
Air Cleaner
(303-12B Intake Air Distribution and Filtering -
TD4 2.2L Diesel, Removal and Installation).
2.
Remove the battery tray.
Refer to:
Battery Tray
(414-01 Battery, Mounting and Cables,
Removal and Installation).
3.
4.
Torque: 24 Nm
5.
6.
Installation
1.
CAUTION: Make sure that the mating faces are clean and
free of corrosion and foreign material.
To install, reverse the removal procedure.
1.
Manual Transmission/Transaxle External Controls - Gearshift Lever
Removal and Installation
Removal
Remove the floor console.
Refer to:
Floor Console
(501-12 Instrument Panel and Console,
Removal and Installation).
1.
2. NOTE: Neutral must be selected before the cables
are released to allow the cables to be correctly set on
the install.
2.
3.
4.
Installation
Install the gearshift lever.
Torque: 10 Nm
1.
Secure the selector cables.
2.
Connect the selector cable ball joints.
3.
Release the LH cable securing clip.
Allow the gearshift lever to come to rest in the
neutral position.
Secure the cable selector clip, without disturbing
the gearshift selector lever position.
4.
Install the floor console.
Refer to:
Floor Console
(501-12 Instrument Panel and Console,
Removal and Installation).
5.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст