Frelander 2. Manual — part 380
3.
WARNING: This step requires the aid of
another technician.
3.
Installation
Install the rear muffler and tighten the service sleeve.
Torque: 40 Nm
1.
Exhaust System - I6 3.2L Petrol - Front Muffler
Removal and Installation
Special Tool(s)
100-051
Cutter, Exhaust Pipe
Removal
• NOTE: Removal steps in this procedure may contain installation details.
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise the vehicle on a lift.
1.
Using the special tool, cut the exhaust pipe at a
distance of 300mm from the front of the rear muffler.
Special Tool(s):
100-051
2.
3. NOTE: Discard the gasket.
Torque: 25 Nm
3.
4.
Installation
1. NOTE: Install a new gasket.
Install the front muffler and tighten the service sleeve.
Torque: 40 Nm
1.
Exhaust System - I6 3.2L Petrol - Catalytic Converter
Removal and Installation
Special Tool(s)
310-121
W rench, H02S
Removal
• NOTE: Removal steps in this procedure may contain installation details.
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise the vehicle on a lift.
1.
Remove the front splash shield.
Refer to:
Engine Undershield
(501-02 Front End Body Panels,
Removal and Installation).
2.
3.
Torque: 25 Nm
4.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст