Frelander 2. Manual — part 524
Release the hood latches.
7.
8.
Release the harness.
9.
10.
WARNING: This step requires the aid of
another technician.
10.
11. NOTE: Do not disassemble further if the component
is removed for access only.
11.
Installation
Install the headlamp brackets.
Torque: 6 Nm
1.
2.
WARNING: This step requires the aid of another technician.
Install the hood latch panel.
Torque: 24 Nm
2.
Secure the electrical harness.
3.
Install the radiator mountings.
Torque: 6 Nm
4.
Install the hood latches.
Torque: 10 Nm
5.
Install the windshield washer reservoir filler neck.
Torque: 6 Nm
6.
Install the power steering fluid reservoir.
7.
Install the front impact sensors.
Refer to:
Front Impact Severity Sensor
(501-20B Supplemental
Restraint System, Removal and Installation).
8.
Install the front fenders.
Refer to:
Fender
(501-02 Front End Body Panels, Removal and
Installation).
9.
Install the headlamps.
Refer to:
Headlamp Assembly
(417-01 Exterior Lighting, Removal
and Installation).
10.
Body Closures -
Torque Specifications
Description
Nm
lb-ft
Front door check strap
24
18
Front door hinge bolts
30
22
Hood hinges
24
18
Liftgate hinge bolts
24
18
Liftgate support strut spigot
24
18
Rear door check strap
24
18
Rear door hinge bolts
30
22
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст