Frelander 2. Manual — part 406
Speed Control - TD4 2.2L Diesel -
Torque Specifications
Description
Nm
lb-ft
Accelerator pedal assembly nuts
10
7
Speed Control - TD4 2.2L Diesel - Speed Control2.2L Diesel
Description and Operation
COMPONENT LOCATION
Item
Part Number
Description
1
-
Instrument cluster
2
-
Clockspring
3
-
Speed control steering wheel switches
4
-
Speed control inhibit switch
5
-
Stoplamp switch
6
-
transmission control module (TCM)
7
-
accelerator pedal position (APP)
8
-
engine control module (ECM)
OVERVIEW
The speed control system maintains a set speed selected by the driver until operation is suspended or cancelled by a
further input from the driver and is controlled by the ECM.
The speed control system comprises the following components:
A set +/- switch
A RESUME switch
A CANCEL switch.
The system also uses the following:
The ECM
The stoplamp switch.
The APP sensor
A clutch switch
The ECM controls the set speed by modifying engine speed/torque and requesting gearchanges from the transmission
(automatic variants only).
CONTROL DIAGRAM
• NOTE: A = Hardwired; D = High speed controller area network (CAN) bus
Item
Part Number
Description
1
-
APP
2
-
Speed control steering wheel switches
3
-
Clockspring
4
-
TCM
5
-
Instrument cluster
6
-
ECM
7
-
Stoplamp switch
8
-
Speed control inhibit switch
Speed Control - TD4 2.2L Diesel - Speed Control Switch
Removal and Installation
Removal
Disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
Make the SRS system safe.
Refer to: Supplemental Restraint System (SRS) Depowering and
Repowering (501-20, General Procedures).
2.
Remove the driver air bag module.
Refer to:
Driver Air Bag Module
(501-20B Supplemental Restraint
System, Removal and Installation).
3.
Remove the 2 Torx screws.
Disconnect the electrical connector.
4.
Installation
To install, reverse the removal procedure.
1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст