Frelander 2. Manual — part 361
12.
13.
Drain the transmission fluid.
Refer to:
Transmission Draining and Filling
(308-03 Manual
Transmission/Transaxle, General Procedures).
14.
Remove the front wheels and tires.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
15.
Using the special tool, release the LH and RH tie-rod
end ball joints.
Special Tool(s):
211-316
16.
Using the special tool, remove the lower arm ball joint.
Special Tool(s):
205-754A
17.
18.
CAUTION: Make sure that the ball joint ball
does not rotate.
• NOTE: Discard the 2 nuts.
Disconnect both front stabilizer bar links from the
stabilizer bar.
18.
19.
CAUTION: Be prepared to collect escaping
fluids.
• NOTE: Make sure that all openings are sealed.
Disconnect the pressure lines from the power steering
gear.
19.
20. NOTE: RH illustration shown, LH is similar.
Remove both the fender splash shield extension
panels.
20.
Remove the towing eye cover.
21.
Remove the 2 bolts securing bumper cover.
22.
Release the PAS lines.
23.
24.
CAUTION: Be prepared to collect escaping
fluids.
• NOTE: Make sure that all openings are sealed.
Release the fuel line.
24.
Remove the lower support insulator.
25.
Release the downpipe catalytic converter.
26.
Support the subframe.
General Equipment:
Powertrain Jack
27.
28.
CAUTION: Make sure that new subframe bolts
are installed.
Remove the front subframe cross-brace.
28.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст