Frelander 2. Manual — part 433
Climate Control - Temperature Blend Door Actuator RHRHD AWD
Removal and Installation
Removal
• NOTE: Removal steps in this procedure may contain installation details.
Make the SRS system safe.
Refer to:
Standard W orkshop Practices
(100-00 General Information,
Description and Operation).
1.
Remove the steering column.
Refer to:
Steering Column
(211-04 Steering Column, Removal and
Installation).
2.
Remove the driver lower air bag module support
bracket.
Torque: 7 Nm
3.
4.
5.
Installation
To install, reverse the removal procedure.
1.
If a new component has been installed, configure using Land Rover
approved diagnostic equipment.
2.
Climate Control - Temperature Blend Door Actuator RHLHD AWD
Removal and Installation
Removal
Remove the glove compartment.
Refer to:
Glove Compartment
(501-12 Instrument Panel and
Console, Removal and Installation).
1.
2.
3.
Installation
To install, reverse the removal procedure.
1.
If a new component has been installed, configure using Land Rover
approved diagnostic equipment.
2.
Climate Control - Defrost Vent/Register Blend Door ActuatorLHD AWD
Removal and Installation
Removal
Remove the glove compartment.
Refer to:
Glove Compartment
(501-12 Instrument Panel and
Console, Removal and Installation).
1.
2.
Installation
To install, reverse the removal procedure.
1.
If a new component has been installed, configure using Land Rover
approved diagnostic equipment.
2.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст